H2W Technologies: Linear Motors - Motion Control Systems

Home

Motion Control Components – Miniature Voice Coil Motor Features High Force to Size Ratio!

Posted by Editor on October 9th, 2023

Motion Control – Miniature Voice Coil Motor

Van Nuys, CA – Motion Control Components – The miniature Linear Voice Coil Motor, LVCM-022-013-01, from Moticont features a high force-to-weight ratio of 14.5 oz. (4.0 N) continuous force and 45.7 oz. (12.7 N) peak force in a compact 0.875 in. (22.2 mm) diameter x 0.50 in. (12.7 mm) long package. This clean, quiet, efficient, low inertia, high acceleration, high speed motor has zero cogging and features high accuracy, and high repeatability to less than1 μm (0.00004 in.) when operated in a closed loop as a DC servo motor. Read more »

Linear Motion Spindle Drives – Maxon GP 6 S Miniature Spindle Drives for Linear Positioning Tasks!

Posted by Editor on September 21st, 2023

Linear Motion Spindle Drives

The GP 6 S micro linear motion spindle drives have a diameter of six millimeters and is available with integrated ball bearings for high axial loads. Versions include metric ceramic or metal spindles.

Fall River, MA – Linear Motion Spindle Drives are the perfect solution for linear positioning systems, lens adjustment, or syringe pumps. If the drive also has to be compact, then maxon motor’s GP 6 S spindle gear is the perfect choice. To provide a cost-effective alternative to the ceramic version, it is now also available with a metal spindle. Read more »

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Posted by Editor on September 7th, 2023

Motion Control – Hollow Core Voice Coil Motor

Van Nuys, CA – Motion Control – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).

The hollow core allows for optics, illumination, laser beams, or cables to pass through. With a 0.50 in. (12.7 mm) stroke length, a continuous force rating of 4.8 lbs (21.3 N) and a peak force of 15.15 lbs (67.4 N) at a 10% duty cycle, this compact voice coil motor measuring just 2.000 in. (50.8 mm) dia. X 1.00 in. (25.4 mm) housing length, is ideal for applications such as: Positioning, medical diagnostics and testing, laser beam steering, dynamic vibration absorption, optical focusing, laser cutting & welding, scanning, assembly, and wafer handling. Read more »

Motion Cotrol Application Story – LM76’s JET Rail Linear Bearings and Engineering Exceed the Challenge!

Posted by Editor on September 4th, 2023

Motion Control – JetRail Linear Bearings Application

Motion Control – Because LM76 understands workplace environments, manufacturing processes, and offers a complete line of linear bearing systems, LM76 was able to solve a problem and eliminate downtime!

E. Longmeadow, MA – Motion Control — When profile rail guides fail within a week bring production to a standstill LM76 was called on to supply a linear bearing system that would stand up under extreme conditions. This application story is not claiming that LM76 Jet Rail Systems are superior to profile rail guide systems. However, in this harsh environment the LM76 Jet Rail System proved to be the correct engineering option. Read more »

Motion Control – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!

Posted by Editor on August 31st, 2023

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

Van Nuys, CA – — Motion Control – An extensive series of XZG Positioning Stages (X-axis, Z-axis, and Goniometer) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for both the X and Z axes that feature high precision 1 mm per turn lead screws, and if required travel lengths over 100 mm are also available. Additionally, any of three goniometers with +/-10, +/-15, +/-45 degrees of travel can be selected and mounted in a horizontal (pictured) or vertical orientation.

Additionally, four motor options are the: -01 version which has Stepper Motor driven axes, -02 version has Three Phase-Servo Motor driven Axes, -03 version has DC Servo Motor Driven Axes and -04 version has Stepper Motor Driven Axes with Quadrature Optical Encoders for position verification. Read more »

Linear Motion Stages – Compact, Open Aperture Voice Coil Stages Features 1 Micron and 30 Micron Positioning Resolutions!

Posted by Editor on August 14th, 2023

Linear Motion Stages

Van Nuys, CA – Linear Motion Stages – The compact open aperture HCDS-051-032-013-01-B1-30 and the HCDS-051-032-013-01-B1-01 Voice Coil Stages from Moticont have a foot print of just 2.000 in. (50.8 mm) wide by 5.000 in (127.0 mm) long and feature positioning resolutions of 30 microns and just 1 micron respectively. These precision linear motion stages allow the user to select the level of precision needed for an application.

The 1 micron resolution HCDS-051-032-013-01-B1-01 Voice Coil Stage features cross roller linear bearings whereas the 30 micron HCDS-051-032-013-01-B1-30 Voice Coil Stage uses linear ball bearings. Read more »

Motion Control – XZ-Axis Motorized Linear Positioning Stages feature 1 Micron Repeatability from Optimal Engineering Systems, Inc. (OES)!

Posted by Editor on August 11th, 2023

Motion Control – XZ-Axis Positioning Stages

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has added a new series of 15 mm, 30 mm, 50 mm, and 75 mm Linear Motion Positioning Stages to their broad selection of precision motion control components. Each of these motorized XZ-Axis Linear Positioning Stages features 1 micron repeatability and 10 micron positional accuracy. Both the X-axis (horizontal axis) and the Z-axis (vertical axis) have the travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm and even longer to meet your application requirements. Read more »

Motion Control – Linear Guide Systems Move 1200 Lb. Loads At Speeds Of 30 Feet Per-Second!

Posted by Editor on July 31st, 2023

Motion Control – High Speed Block and Rail Sets

E. Longmeadow, MA – Motion Control – Two new series of high speed, low cost, compact linear guide systems called, “Speed Guides,TM” have been introduced by LM76. The Speed Demon OSG type and Speed Demon SG type linear guide systems are designed for speeds up to 10 m/sec. (32.8 ft/sec.), accelerations to 50 m/sec.2 and loads up to 5600 N. (1259 lbs.). These quiet, low profile guide systems are ideal for: High speed assembly and sorting operations, pick and place robots, industrial, office, and packaging machines, vacuum applications, and medical equipment (including patient care devices). Read more »

Motion Control – Open Aperture Voice Coil Stage Features 1 Micron Positioning Resolution!

Posted by Editor on July 24th, 2023

Motion Control – Open Aperture Voice Coil Stage

Van Nuys, CA – Motion Control Components – The compact HCDS-025-038-02-B1-01 Voice Coil Stage from Moticont has a foot print of just 2.000 in. (54.0 mm) wide by 5.000 in (127.0 mm) long and features a positioning resolution of 1 micron and a 0.125 in. (3.175 mm) open aperture. This precision cross roller stage has a 0.97 in. (24.6 mm) range of motion with 1.0 lb. (4.4 N) of continuous force and 3.2 lb (14.2 N) peak force. The zero cogging, clean, quiet, efficient, low inertia, high acceleration, high speed voice coil driven stage has a built-in home switch for accurate initialization. Read more »

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

Posted by Editor on July 13th, 2023

Motion Control – 600 MM Vertical Lift Stages

Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm. The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 is driven by a Brushless DC Servo Motor with a Quadrature Incremental Encoder and the AT20-600-03 is driven by a DC Servo Motor with a Quadrature Incremental Encoder. Each of the Servo Motor options, the -02 and -03 versions, offer higher travel speeds, increased positional accuracy, and repeatability. The AT20-600-04 is driven by a Two-Phase Stepper Motor with a Quadrature Incremental Encoder mounted on the motor for position verification. Read more »

Motion Control – Open Aperture Voice Coil Stages Feature 1.20 Inches of Travel and Resolutions of 29.95 and 25.4 Microns!

Posted by Editor on July 10th, 2023

Motion Control – Open Aperture Voice Coil Stages!

Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up. Read more »

Motion Control – Self-Lubricating – Linear Motion – Double Flange Block Series Bearings

Posted by Editor on July 6th, 2023

Motion Control – Minuteman Flange Blocks

Read more »

Linear Motion Precision Stages – Choose the Right Low Cost Stage to Suit Your Motion Control Application!

Posted by Editor on July 3rd, 2023

Linear Motion Precision Stages

Van Nuys, CA – — Linear Motion Precision Stages – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available in travel distances of: 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Read more »

Motion Control – Metric and Inch Dimensioned Electric Cylinders Feature High Speed, Zero Cogging, and 1.25 Micron Resolution!

Posted by Editor on July 1st, 2023

Motion Control – Metric & Inch Dimensioned Electric Cylinders!

Van Nuys, CA – Motion Control Components – New, Metric and Imperial dimensioned Electric Cylinders or Linear Voice Coil Servo Actuators have been released by Moticont. The new, compact 25.4 mm (1.000 in.) stroke SDLM-025-095-01-01M and SDLM-025-095-01-01 Linear DC Servo Actuators feature high repeatability, high acceleration/deceleration, and zero cogging! These high force-to-size Electric Cylinders have linear encoders mounted internally for closed loop servo operation. Additionally, to operate at peak efficiency, integral temperature sensors provide data to achieve the highest possible throughputs.

The clean fully enclosed SDLM-025-095-01-01M and SDLM-025-095-01-01 Servo Actuators are 25.4 mm (1.000 in.) in diameter, the housing is 95.3 mm (3.750 in.) long and the total length of the housings and shafts are 139.7 mm (5.500 in.). Read more »

Motion Control – Low Cost Linear Optical Encoder Module and Linear Scale Feature 1.25 Micron Resolution!

Posted by Editor on June 22nd, 2023

Motion Control – Linear Optical Encoder Modules!

Van Nuys, CA – Motion Control Components – Moticont has released their OEM-00125U-01 Linear Optical Encoder Module and LS-00125U-01 Linear Scale. The compact linear encoder module measures just 51.5 mm (2.027 in.) long by 5.99 mm (0.236 in.) wide by 0.8 mm (0.073 in.) high. This high, 1.25 micron resolution, low power encoder module features TTL Quadrature Outputs and requires only a single +3.3 or +5 VDC supply.

The LS-00125U-01 Linear Scale supplied is only 6 mm (0.24 in.) wide by 0.3 (0.01 in.) high and would be attached to a flat surface using PSA adhesive. The standard scale length is 76.2 mm (3.00 in.) long. The linear scale is available with lengths up to 610.0 mm (24.00 in.). The quadrature signals are output differentially. The module also features a TTL level HOME output. Read more »

Motion Control – XY Alignment Stage Featuring High Resolution and High Repeatability Available from OES!

Posted by Editor on June 15th, 2023

Motion Control – XY Alignment Stage

Van Nuys, CA – — Motion Control – The AU200-50×50-SC Alignment Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, high repeatability XY stage for such applications as: alignment, assembly, laser drilling, machining, medical, industrial, semiconductor handling, testing, scanning, and optical applications. The linear travel of the X and Y axes is 50 mm x 50mm, and the resolution of each axis is 5 microns (non-micro-step) or 0.125 microns (with 20 micro-steps per step motor driver in use), repeatability is 1.5 microns, and positional accuracy is 5 microns. The 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings contribute to the high precision and stiffness of the AU200-50×50-SC Alignment Stage. Read more »

Motion Control – Smaller in Diameter than a US Quarter, This Miniature Voice Coil Motor Has a High Force-to-Size Ratio!

Posted by Editor on June 8th, 2023

Motion Control – Miniature Voice Coil Motor

Van Nuys, CA – Motion Control Components – Smaller in diameter than a United States quarter, the miniature Linear Voice Coil Motor, LVCM-019-016-02, from Moticont has a high force-to-size ratio! It produces 8.9 oz. (2.5 N) of continuous force and 28.0 oz. (7.8 N) of peak force in a compact 0.750 in. (19.1 mm) diameter x 0.94 in. (23.8 mm) long envelope (at mid stroke). Read more »

LM76 – FDA/USDA/3-A Dairy Compliant Linear Motion Components

Posted by Editor on June 5th, 2023

LM76 – FDA/USDA and 3A-Dairy Compliant Bearings!

E. Longmeadow, MA – LM76 Motion Control – Components – Linear Motion – Linear Motion – LM76 FluidLine Linear/Rotary bearings are FDA/USDA & 3A Dairy Complaint. They are also caustic wash down inert. FluidLine bearings one piece construction has benefits over traditional Teflon Composite lined aluminum bearings: if you have a wear situation, Teflon Composite Bearings have a .035″ Teflon Composite Liner. Once you wear through the liner, you are into the aluminum shell. Read more »

Motion Control – 20 mm Linear Stepper Motor by Nippon Pulse are available from Electromate!

Posted by Editor on May 30th, 2023

Motion Control – 20 mm Linear Stepper Motor!

Vaughan, Ontario, Canada — Motion Control — Nippon Pulse is excited to introduce its smallest linear stepper motor yet, the PFL20 Linearstep. The PFL20 is a highly efficient, high thrust tin-can linear actuator with a 20mm diameter and a bipolar winding.

The motion control PFL20 is RoHS-compliant, has a 30/60mm effective stroke, and can reach 6 N of force at 200 pps. With 24 steps per revolution, the lead screw has a 1.2mm thread pitch; the PFL20 also reaches 5V rated voltage, resistance of 33 Ohms/phase and inductance of 12mH/phase. The datasheet with additional specifications can be found here. Read more »

Motion Control – 0.625 in. Diameter Miniature Voice Coil Motor Has A 0.125 in. Open Aperture!

Posted by Editor on May 22nd, 2023

Motion Control – Miniature Voice Coil Motor!

Van Nuys, CA – Motion Control Components – Moticont is introducing their most compact miniature hollow core linear actuator; the HVCM-016-010-003-01 Linear Voice Coil Motor, featuring a 0.125 in. (3.2 mm) open aperture and high force-to-size ratio. This miniature open aperture actuator is a true DC Linear Servo Motor. Quiet and clean, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration/deceleration, and high speed. Measuring just 0.625 in. (15.9mm) by 0.625 in. (15.9mm) long at mid-stroke it has a continuous force rating of 5.0 oz. (1.4 N) and a peak force of 15.7 oz (4.4 N) at a 10% duty cycle.

The open aperture of the HVCM-016-010-003-01 Linear Motor allows for optics, illumination, and laser beams. It is ideal for applications such as: Haptic feedback, medical diagnostic equipment, testing, optical focusing, positioning, laser beam steering, wafer handling, dynamic vibration absorption, laser drilling, cutting, welding, and machining applications. Read more »