Category Archives: Push Type

Motion Control – Select from the S-70-300H Series of 3 Inch Dia. Push Type Solenoids to Meet the High Force Requirements of an Application!

Motion Control – Push Type Solenoids

motion control - push type solenoid
Motion Control – Van Nuys, CA – Solenoids – The S-70-300H Series of high force Push Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). Ideal for strokes of up to 4.00 inches, this series of solenoids features 18 different solenoids to select from based on the Force, Voltage, Duty Cycle, and Stroke requirement of the user. MSS Solenoids coils typically utilize Class “F” 23 to 40 AWG (American Wire Gauge) windings with Class “A” lead wire insulation for better protection of the solenoid during longer duty cycles.

Solenoids - mss logo blk

The S-70-300H Series of solenoids feature a 3.000 in. diameter x 7.00 in. long housing and a 1.75-12 UN A thread for mounting.

Motion Control – The S-63-38 Series of 0.38 Inch Dia. Pull Type Solenoids Features 16 Standard models to Meet Voltage, Duty Cycle, Force, and Stroke Requirements of an Application!

Motion Control Technology Newsletter – Tubular Solenoids

motion control - solenoid
Motion Control Technology – Van Nuys, CA – The S-63-38 Series of Pull Type Tubular Solenoids has been released by Magnetic Sensor Systems (MSS). This series of 0.38 in. diameter solenoids features 16 standard off-the-shelf solenoids to select from based on the Voltage, Duty Cycle, Force and Stroke requirement of the user.

motion control - mss logo blk

These miniature solenoids featuring a 0.38 in. diameter have a 0.66 in. long housing and when retracted are just 0.80 in. long.

Motion Control – Select from a Series of Compact Electromagnets to Meet Holding Force and Duty Cycle Requirements of an Application!

Motion Control – Electromagnets

motion control - electromagnet

Version 1.0.0

Motion Control – Van Nuys, CA – A powerful series of compact, low cost electromagnets has been released by Magnetic Sensor Systems (MSS). Their E-22-150 Series of Tubular Electromagnets 1.5 in. in diameter x 2.15 in. feature 19 different windings to select from based on the duty cycle and holding force requirements of the application. E-22-150 Electromagnets are immediately available off-the-shelf in sample quantities and OEM quantities for Just-In-Time deliveries.

motion control - mss logo blk

Depending on the application, duty cycle, and required force, the electromagnets in this series can supply 54 to 83 lbs. of holding force for duty cycles ranging from 100% (continuously on) to 10%. This series of electromagnets is ideal for use for: Door controls (hold open, hold close), relays, lifting gantries, material handling, magnetic locks and switches, security systems, failsafe brakes, magnetic separation, research equipment, valves, and office equipment.

Motion Control – NEW! Metric and Inch Dimensioned Electric Cylinders Feature High Speed, Zero Cogging, and 1.25 Micron Resolution

Motion Control – Electric Cylinders!
motion control - electric cylinder

Van Nuys, CA – Motion Control – New, Metric and Imperial dimensioned Electric Cylinders or Linear Voice Coil Servo Actuators have been released by Moticont. The new, compact 25.4 mm (1.000 in.) stroke SDLM-025-095-01-01M and SDLM-025-095-01-01 Linear DC Servo Actuators feature high repeatability, high acceleration/deceleration, and zero cogging! These high force-to-size Electric Cylinders have linear encoders mounted internally for closed loop servo operation. Additionally, to operate at peak efficiency, integral temperature sensors provide data to achieve the highest possible throughputs.

motion control - moticont

The clean fully enclosed SDLM-025-095-01-01M and SDLM-025-095-01-01 Servo Actuators are 25.4 mm (1.000 in.) in diameter, the housing is 95.3 mm (3.750 in.) long and the total length of the housings and shafts are 139.7 mm (5.500 in.).