Motion Control – Linear Plain Bearings

Motion Control – Low Coefficient Bearings

Motion Control Application – How Would You Position Components Of An Experimental Reactor Vessel Weighing 33 Tons?

Easy … Using Custom made LM76 Jet Rail Bearings and Shafting!

E. Longmeadow, MA –Linear Motion Control Application – When a privately funded research company was ready to move from their original Proof of Concept to a sustainable fusion reactor to produce clean sustainable energy, they realized that extremely heavy components would need to be assembled and disassembled and reassembled again for design modifications and maintenance. The completed assembly would be the length of two buses and easy alignment of the individual components would be critical.

The main reactor, the fusion containment chamber that is capable of containing a plasma medium of 10 to 15 million degrees is made of non-magnetic stainless steel as are many of the components. The Plasma Medium could be described as a football shaped blob about 1 meter in diameter by 2 meters long. The plasma medium is injected from each end of the reactor assembly by Plasma Guns.

See photo to right – On each end of the assembly is a Plasma Gun. The Plasma Guns as are all the floor lever components, are positioned using LM76 Jet Rail Bearings and shafting. The Jet Rail Bearings and Shafting can be seen near to bottom of the picture.

In addition to the reactor, high energy particle beam generators are positioned at angles to the fusion containment chamber. These particle bean generators form and suspend the plasma medium for an indefinite period of time in the center of the containment chamber. These generators have to be easily positioned – by hand – to accommodate adjustments and re-assembly.

See photo to the left – Neutral-Beam Injectors are positioned around the Reaction Chamber to position and shape the Plasma Medium. These are also moved into position on LM76 Jet Rail Bearings and Shafting.

In addition to supporting the weight of the components, the bearings selected to move these massive loads during the construction and testing of the fusion reactor would have to be non-magnetic. Working with engineers, LM76 developed a custom 3 inch Jet Rail Bearing designed to carry both the weight of the fusion reactor and the high energy particle generators. In addition LM76 supplied precision ground, 3 inch 303 stainless steel (non-magnetic) shafting.

The custom manufactured Jet Rail Roller Blocks and 303 stainless steel shafting simplified the assembly/disassembly of the fusion containment chamber and components while ensuring critical alignment throughout travel.

This breakthrough fusion reactor is still in the experimental stage. A commercially viable reactor would need to contain 100 million degrees. Why is the project so important? Because in addition to producing sustainable energy, its only by-product is, environmentally safe, “helium ash.”.

See photo below – The drawing below shows all the components in place. The assembly is 60 meters long and supported on LM76 jet Rail Bearings and Shafting.

For additional information about Jet Rail Linear Bearings and Shafting from LM76 go to: http://www.lm76.com/jet_rail.htm

About LM76 and “The Engineering Edge”

Founded in 1976, LM76 has been a leading designer/manufacturer of linear bearings, slides and linear motion systems. LM76 is renowned for its industry leading Minuteman PTFE Composite linear bearings. LM76 is a leading supplier of precision linear shafting: RC60, 300 Series Stainless Steel, and ceramic-coated aluminum shafting. LM76 also offers several FDA/USDA compliant linear bearings and slides for the food processing, pharmaceutical, medical, and packaging industries.

When others think catalog …   … LM76 thinks solution!

For additional information contact Mike Quinn at: LM76, 140 Industrial Dr., E. Longmeadow, MA 01028; Telephone: 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com or visit the website at http://www.lm76.com

See this and other Motion Control Components from LM76 featured on:

The LM76 Blog

LM76 Catalogs

http://MotionShop.com

http://LinearMotionBlogger.com

http://AllMotionBlogger.com

http://Automation-Blogger.com

http://MotionControlBlogger.com

http://MotionControlBuyersGuide.com

http://MotionControlWeb.com

http://MotionShop.net

http://Catalogs-MotionControl.com

Motion Control – Minuteman Flange Blocks

Motion Control – USDA Certified Stand-Off Bearing Flange Blocks

E. Longmeadow, MA – Motion Control – FDA/USDA Certified, two, three and four post, Stand-Off Bearing Flange Blocks are setting a new standard for performance and Hygienics. These new Stand-off bearing flange blocks now available from LM76 reduce the surface area where mold and bacteria can thrive, even from the most through sanitizing operations. Long life Hybrid Stainless Steel Si3N4 Silicon Nitride Ceramic Ball Bearings in Stainless Steel bearing blocks are coated with a smooth non-water absorbing polyamide coating certified by EHEDG, USDA, and 3-A.