H2W Technologies: Linear Motors - Motion Control Systems

Home

LM76 – Low Cost, FDA/USDA/3A-Dairy Compliant Water Dog Linear Slides!

Posted by Editor on February 13th, 2023

Low Cost, FDA/USDA/3A-Dairy Compliant Water Dog Linear Slides!

E. Longmeadow, MA Motion — Control Components – Linear Motion – FDA/USDA/3A-Dairy compliant, Water Dog Sliders from LM76 feature Corro-SlickTM coated 300 series stainless steel rails and contoured WDX Polymer blocks. Water Dog Sliders can be washed down with the most aggressive chemicals and caustic foaming agents and have an operating temperature range of – 400O to +180 OF. Quiet, low maintenance Water Dog Sliders can be used: Dry, submerged in liquids, and in refrigerated and frozen environments. Read more »

Motion Control – Low Cost, High Precision Linear Voice Coil Stages from Moticont!

Posted by Editor on January 29th, 2023

Motion Control – Voice -Coil Stage

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-089-01 series linear motion control voice coil stages feature a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 13.5 in (342.9 mm) long x 4.00 in. (101.6) wide x 3.755 in. (95.4 mm) high, the VCDS-051-089-01 series stages have a linear travel of 2.20 in. (55.9 mm); a continuous force of 6.0 lbs (26.7 N) and a peak force of 19 lbs (84.3 N) (at a 10% duty cycle). Read more »

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Posted by Editor on January 12th, 2023

Motion Control – Hollow Core Voice Coil Motor

Van Nuys, CA – Motion Control Components – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).

The hollow core allows for optics, illumination, laser beams, or cables to pass through. Read more »

Motion Control – The Minuteman Series, Teflon® Composite Bearings Are Now Available As A Twin Pillow Block Linear Rail Assembly!

Posted by Editor on January 10th, 2023

Motion Control – Teflon® Composite Twin Bearing/Pillow Block Rail Assembly!

E. Longmeadow, MA –Motion Control – Save time and energy by ordering one or more Minuteman^TM M-SRBT Twin Pillow Block Linear Rail Assemblies from LM76. Recognized by engineers, machine builders, and retrofitters, the Minuteman^TMSeries of Teflon® composite bearings from LM76 are ideal for applications that involve linear, rotary, and/or oscillating motion. The self lubricating Minuteman Series composite bearings can handle 10 times the load, has a very low coefficient of friction, dampen vibrations, tolerates shock, and are lower in cost than that of conventional linear ball bearings.

These composite bearings can be submerged, washed down with water, high pressure steam, or chemicals, and can operate in harsh, abrasive, and contaminated environments. Read more »

Motion Control – High Precision, XAB Triple-Axis (2 Goniometers and X-Axis) Stage Available from OES!

Posted by Editor on January 8th, 2023

Motion Control – Triple-Axis Stage!

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) offers a very low cost solution for the precise measurement of compound angles or the rotation of an object to precise angular positions.

The XAB-050-XX-01 integrates a two-axis Alpha-Beta goniometer on top of a single-axis linear actuator. The Beta-axis has a travel range of +/- 15 degrees with a rotation height of 50 +/- 0.2 mm. Read more »

Motion Control – Compact Rotary Solenoids Available in OEM Quantities, Can Be Performance Matched To An Application!

Posted by Editor on December 27th, 2022

Motion Control – Rotary Solenoids

Motion Control – Van Nuys, CA –The R-09-150 CCWM Series of Counter Clockwise, Forward Shaft Extension Rotary Solenoids from Magnetic Sensor Systems (MSS), available in OEM quantities, features 18 different winding configurations allowing the user to match torque and duty cycle requirements to an application. These compact 38.1 mm (1.50 in.) diameter solenoids are just 22.098 (22.1) mm (0.87 in.) long and have two M4X0.7 threaded studs (8-32 studs optional) 7.366 (7.4) mm (0.29 in.) long on a 22.225 (22.2) mm (0.875 in.) bolt circle. The shaft has 40 degrees of counter clockwise rotation, extending (13.0) mm (0.51 in.). The shaft end is serrated for a better grip of the attached load.

The R-09-150 CCWM Series of Rotary Solenoids can be specified with a choice of AWG winding of 21 to 37 gauge. Specifying a different AWG for the windings allows the user to control the performance of a solenoid with respect to duty cycle, current supplied, and torque by controlling the ampere turns. Read more »

Motion Control – Use FDA Compliant Off-the-Shelf Linear Motion Components!

Posted by Editor on December 23rd, 2022

Motion Control – FDA Compliant Components

To: OEMs “Tooling Up” for Urgently Needed Medical Products! Use FDA Compliant Off-the-Shelf Linear Motion Components!

E. Longmeadow, MA — Motion Control – In dealing with the COVID-19 pandemic many companies have volunteered or been requested to produce urgently needed medical products such as: Masks, gowns, and ventilators. “Tooling Up” quickly to produce medical grade products for some companies can bring challenges. Read more »

Motion Control – Low Cost, Long Range of Travel, High Precision, Low Profile, Motorized, Profile Rail Linear Guide Stages Are Available from OES

Posted by Editor on December 22nd, 2022

Motion Control – Profile Rail Stages

Van Nuys, CA – — Motion Control – Optimal Engineering Systems, Inc. (OES) has added five new profile single axis positioning stages to their AQ150 Series of linear stages. Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder. Read more »

Motion Control – Complete Guided Motion Solutions from A to X-Y-Z … … Available from Electromate!

Posted by Editor on December 17th, 2022

Motion Control – Linear Systems

Vaughan, Ontario, Canada — Motion Control Components — Bishop-Wisecarver invented and patented DualVee Motion Technology® more than 40 years ago to provide a solution for harsh environment applications where existing technologies were ineffective. DualVee® also proved excellent for long length, smooth motion and low noise requirements. Read more »

Motion Control – Open Aperture XY Stages from OES Feature: High Resolution and High Repeatability!

Posted by Editor on December 13th, 2022

Motion Control – Open Aperture XY Stages!

Van Nuys, CA – — Motion Control – Two new high resolution, high repeatability XY stages have been released by Optimal Engineering Systems, Inc. (OES). The AU200-15×15-01 Motorized Stage (pictured) and the AU200-15×15-04 Motorized Stage are powered by Two-Phase Stepper Motors and have high 0.25 micron resolution and high 1.5 micron repeatability.

The AU200-15×15-04 stage includes Quadrature encoders for position verification. Both stages have a large 3.54 in. x 3.54 in. (90 mm x 90 mm) platform with large open aperture and feature standard 1 mm-per-turn ground lead screws, and precision V-grove and Cross Roller guides. Read more »

Motion Control – Compact 0.750 Inch Diameter Voice Coil Motor Features A 1.500 Inch Stroke and High Force-to-Size Ratio!

Posted by Editor on December 11th, 2022

Motion Control – Long Stroke Voice Coil Motor!

Van Nuys, CA — Motion Control – Moticont has added a 0.750 in. (19.1 mm) diameter (smaller than a US Quarter) Linear Voice Coil Motor, to their expanding line of voice coil or moving coil motors. The LVCM-019-048-02 Linear Voice Coil Motor is a true servo motor featuring zero cogging, high accuracy, and high repeatability when operated in a closed position loop. Voice Coil Motors (also referred to as actuators) are clean, quiet, efficient, brushless high speed linear servo motors.

This small LVCM-019-048-02 diameter actuator has a 1.500 in (38.1 mm) stroke length and a high-force-to-size ratio of 7.4 oz (2.1 N) and a peak force of 23.5 oz. (6.5 N) at 10% duty cycle. Read more »

Motion Control – Linear Bearings – Which Type is Right for Your Application?

Posted by Editor on December 5th, 2022

Motion Control – Linear Bearings – Comparison: Ceramic Coated vs Linear Ball Bearings

Read more »

Motion Control – Very Stable, High Precision, High Load, Low Cost Motorized Vertical Lift Stage from OES!

Posted by Editor on November 29th, 2022

Motion Control – Vertical Lift Stage

Van Nuys, CA – — Motion Control Components – The AT20-100 Motorized Vertical Lift Stage from Optimal Engineering Systems, Inc. (OES) is a very stable, high precision, high load vertical lift stage that can be easily integrated into almost any application. The large 120 mm x 180 mm (4.72 in. x 7.08 in.) drilled and tapped platform has a vertical travel of 100 mm (3.93 in.) and features: 3.315 µ (non- Micro-Step) resolution, 5 µ repeatability, and 15 µ positional accuracy. The precision ground lead screw, precision linear bearings, and the rigid box construction of the moving component of the elevator stage assures smooth, flat (parallel to mounting surface) vertical motion. Read more »

Motion Control – Low Cost, High Precision 3 Axes Linear Voice Coil Actuator!

Posted by Editor on November 27th, 2022

Motion Control – XYZ Axis Voice Coil Actuator

Van Nuys, CA – Motion Control – Moticont has released a new three axis XYZ linear actuator the XYZ-10. The X and Y axes of the actuator each has a 0.97 in. (24.6 mm) of travel and the Z axis has a stroke of 0.500 in. (12.7 mm).

The high speed, high acceleration, zero cogging, brushless voice coil motors provides 6.3 lbs (28.2 N) of force and peak forces of 20.0 lbs (89.9 N) at a 10% duty cycle for the X and Y axes. The Z axis linear actuator has a continuous force of 21.2 oz (5.9 N) and 67.0 oz (18.6 N) peak force. Read more »

Motion Control – Precision Manual XYZ Stage from OES!

Posted by Editor on November 16th, 2022

Motion Control – Precision Manual XYZ!

Van Nuys, CA —– Motion Control – This manual crossed roller XYZ-axis positioning stage is made of aluminum alloy with an black anodized coating. The table size is 25 x 25 mm has a body weight of 0.16 Kgf. The maximum load of this super thin table is 1 Kgf. The movement accuracy is Straightness 5µm ,Vertical yawing 30″ and Parallel yawing 25″. Read more »

Motion Control – Direct Drive Linear Motors with Integrated Encoders Offer High Resolution, Speed, No Backlash, and Zero Cogging!

Posted by Editor on November 14th, 2022

Motion Control – Direct Drive Linear Motors

Van Nuys, CA – Motion Control – The new, SDLM-025-070-01-01 direct drive linear motor from Moticont, also known as an electric cylinder, features a built-in encoder, has zero backlash, zero cogging, and provides users with high acceleration, high speed, high resolution, and long life. This direct drive linear motor features 1.25 µm (0.000049 in.) in of resolution. Read more »

Motion Control – High Precision XYR Alignment Stage Has Better Than +/- 3 Micron Accuracy!

Posted by Editor on November 4th, 2022

Motion Control – Alignment Stage!

Van Nuys, CA – — Motion Control -Optimal Engineering Systems, Inc. (OES) has introduced the XYR-300-400 Alignment Stage offering +/- 3 micron accuracy for industrial, medical, semiconductor, production, research, and laboratory applications. The XYR-300-400 Alignment Stage features +/- 15 mm of travel in the X and Y axes and +/- 5 degrees of rotation (theta). It moves in XY-plane and rotates around the center of the XY-plane.

The XYR-300-400 Alignment Stage feature linear resolutions of the X and Y axis of 1 micron resolution with a 10 micro-steps per step motor driver and static parallelism of less than 0.05 mm. Read more »

Motion Control – 5 Micron Resolution, Zero Backlash, Zero Cogging, High Speed Direct Drive Linear Motor With Integrated Encoder!

Posted by Editor on November 2nd, 2022

Motion Control – Electric Cylinder

Van Nuys, CA – Motion Control Components – Moticont has added another linear motor to its SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. The SDLM-051-095-01-05 is a powerful, compact linear actuator measuring just 2.00 in. (50.8 mm) in diameter and 3.75 in. (95.3 mm) long. It has a 1.0 in. (25.4 mm) stroke and features a resolution of 5 microns (0.000197 in.).

The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible bandwidth and accuracy and is protected by the housing. This fully enclosed linear motor features a continuous force rating of 7.6 lbs (33.9 N) and a peak force of 24.1 lbs. (107.2 N) at 10% duty cycle. Read more »

Motion Control – The Engineering Edge – High Speed Linear Motion – Sleeve Style Linear Bearings

Posted by Editor on October 26th, 2022

Motion Control – Sleeve Type Linear Bearings

LM76 has two standard options for sleeve-style linear bearings when replacing linear ball bearings. Same format, dramatically different results. Read more »

Motion Control – Linear Focus Actuator from Equipment Solutions Features 200 Nano Meters Repeatability!

Posted by Editor on October 13th, 2022

Motion Control – 200 Nano Meters Repeatability Actuator!

Forestville, CA, – — Motion Control – This LFA-0604 Linear Focus Actuator: Flexture guidance system, 6 millimeter clear aperture, 4 millimeters of linear motion, 90 G’s acceleration (no load), 200 nanometers positioning repeatability, non-contact electro-optic position sensor, direct SCA814 Servo Controlled Amplifier compatibility, 38mm x 24mm, 80 grams
Read more »