Check for details

Motion Control – How Would You Position Components Of An Experimental Reactor Vessel Weighing 33 Tons?

Posted by Editor on October 12th, 2022

Motion Control – Linear Motion Application


Easily …   … Using Custom made LM76 Jet Rail Bearings and Shafting!

When a privately funded research company was ready to move from their original Proof of Concept to a sustainable fusion reactor to produce clean sustainable energy, they realized that extremely heavy components would need to be assembled and disassembled and reassembled again for design modifications and maintenance. The completed assembly would be the length of two buses and easy alignment of the individual components would be critical.

 

The main reactor, the fusion containment chamber that is capable of containing a plasma medium of 10 to 15 million degrees is made of non-magnetic stainless steel as are many of the components. The Plasma Medium could be described as a football shaped blob about 1 meter in diameter by 2 meters long. The plasma medium is injected from each end of the reactor assembly by Plasma Guns. Read more »

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Posted by Editor on October 6th, 2022

Motion Control – Hollow Core Voice Coil Motor


Van Nuys, CA – Motion Control – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).
motion control - moticont

The hollow core allows for optics, illumination, laser beams, or cables to pass through. Read more »

Motion Control – LM76’s SLIDE RAIL 2 Featuring Advanced INJECT2 Technology!

Posted by Editor on September 30th, 2022

Motion Control – Advanced Block & Rail System

motion control - linear slides

motion control - lm76

 

E. Longmeadow, MA – – Motion Control – Linear Motion – Advanced Linear Block and Rail System – SLIDE RAIL2 is both novel and innovative. Unlike injection molded, plastic-lined block and rail systems, INJECT2 Technology’s unique properties ensure higher loads, 1/2 the coefficient of friction and increased toughness for shock, vibration and contamination. INJECT2 Technology’s low friction, self-lubricating sliding surface guarantees smooth, quiet and contamination proof operation.

Read more »

Motion Control – Miniature Voice Coil Servo Motor Features: 12.7 mm Stroke, High Force-to-Size Ratio, and 1 Micron Resolution!

Posted by Editor on September 24th, 2022

Motion Control – Voice -Coil Stage
motion control - electric cylinder

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont has released the miniature GVCM-016-019-01M Linear Voice Coil Servo Motor.  Smaller in diameter than a US Dime this 15.9 mm (0.625 in.) diameter Servo motor, also called an Electric Cylinder, features a high force-to-size ratio of 1.5 N (5.3 oz) continuous force and 4.6 N (16.6 oz) of peak force.  The compact housing is just 19.1 mm (0.63 in.) long and in the fully extended position the shaft extends 20.0 mm (0.79 in.) beyond the face of the housing.  The end of the shaft has an M2.2X0.45 thread by 4.0 mm long for backlash free connections. Read more »

Motion Control – Akribis Systems Voice Coil Motors & Voice Coil Position Actuators Available from Electromate!

Posted by Editor on September 16th, 2022

Motion Control – Voice Coil Motors &  Actuators!

motion control - voice coil motors

motion control - electromate robotics

 

Vaughan, Ontario, Canada — Motion Control – A “voice coil” is a generalized term that refers to any galvanometer-like mechanism that uses a solenoid to move an object back-and-forth within a magnetic field.

Motion Control Voice coil actuators, or non-commutated DC linear actuators, consist of a permanent magnetic field assembly (permanent magnets and ferrous steel) and a coil assembly. The current flowing through the coil assembly interacts with the permanent magnetic field and generates a force vector perpendicular to the direction of the current. The force vector can be reversed by changing the polarity of current flowing through the coil. Read more »

Motion Control – Linear Bearings Out Perform “ALL” Other Bearings At High Speed & High Acceleration!

Posted by Editor on September 14th, 2022

Motion Control – High Speed Linear Bearings


motion control ceramic bearings
E. Longmeadow, MA – Motion Control – LM76’s high speed, “Black Racer,” ceramic coated linear bearings out perform linear ball bushing and linear polymer bearings in high speed and high acceleration/deceleration applications. These drop in replacement linear bearings are designed to be used in standard open and closed pillow blocks. “Black Racer” linear bearings are ideal for: Rocket sleds, crash test systems, and other high speed, high acceleration application. Read more »

Motion Control – VCDS-051-031-01 Is a High Precision Linear Voice Coil Stages from Moticont!

Posted by Editor on September 9th, 2022

Motion Control – Voice -Coil Stage
motion control - voice coil stage

motion control - moticint

 

 

Van Nuys, CA – Motion Control – Components -– Moticont’s VCDS-051-032-01 series of linear motion control voice coil stages features a voice coil motor, a ball bearing linear slide, home switch, and an integral optical quadrature encoder with differential outputs. Measuring 5.000 in (127.0 mm) long x 2.00 in. (50.8) wide x 2.875 in. (73.0 mm) high, the VCDS-051-089-01 series stages have a linear travel of 0.97 in. (24.6 mm); a continuous force of 6.3 lbs (28.2 N) and a peak force of 20.0 lbs (89.9 N) (at a 10% duty cycle). Read more »

Motion Control – Water Dog Sliders from LM76 are FDA/USDA/3-A Dairy Compliant!

Posted by Editor on August 24th, 2022

Motion Control – FDA-USDA-3a-Dairy Compliant Linear Slides

Engineering Edge - FDA/USDA/3-A Dairy Compliant Linear Slides
Motion Control - engineering edge - Linear slides
Read more »

Motion Control – Low Cost, High Precision Vertical Lift Stage from OES!

Posted by Editor on August 21st, 2022

Motion Control – Vertical Lift Stage

motion control - vertical stage

motion control - OES

 

 

 

Van Nuys, CA – — Motion Control – The AT10-120 Motorized Vertical Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 In.). Read more »

Motion Control – 5 Micron Resolution, Zero Backlash, Zero Cogging, High Speed Direct Drive Linear Motor With Integrated Encoder!

Posted by Editor on August 18th, 2022

Motion Control – Electric Cylinder

Van Nuys, CA – Motion Control Components – Moticont has added another linear motor to its SDLM Series of high speed direct drive linear motors which are also know as Electric Cylinders. The SDLM-051-095-01-05 is a powerful, compact linear actuator measuring just 2.00 in. (50.8 mm) in diameter and 3.75 in. (95.3 mm) long. It has a 1.0 in. (25.4 mm) stroke and features a resolution of 5 microns (0.000197 in.).

motion control - moticont

The integral, linear optical quadrature encoder is directly connect to the shaft for the greatest possible bandwidth and accuracy and is protected by the housing. This fully enclosed linear motor features a continuous force rating of 7.6 lbs (33.9 N) and a peak force of 24.1 lbs. (107.2 N) at 10% duty cycle. Read more »

Motion Control – The Engineering Edge – Custom FDA Compliant Linear Bearings!

Posted by Editor on August 4th, 2022

Motion Control – Custom FDA/USDA Compliant Linear Bearings
The Engineering Edge from LM76

“If we don’t have the FDA Compliant linear bearing for your application, we’ll design and make one.”  Call me at 413-525-4166, Fax: 413-525-3735 or E-Mail: mquinn@lm76.com! Read more »

Motion Control – Get Zero Cogging and High Throughput from Low Cost Moticont Linear Actuators!

Posted by Editor on July 14th, 2022

Motion Control – Electric Cylinder!

motion control - electric cylinder


motion control - moticint

 

Van Nuys, CA — Motion Control – Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series. The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system. Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long. Read more »

Motion Control – New High Precision, Low Profile XY Open Aperture Stage Features 1 Micron Resolution and 2 Micron Repeatability!

Posted by Editor on June 24th, 2022

Motion Control – Alignment Stage
motion control open aperture xy stage

motion control - stages - custom
Van Nuys, CA – — Motion Control – OES (Optimal-Engineering Systems, Inc.) has added a new, high precision open aperture stage to it’s expanding line of precision XY stages. The AU200-100×100 stage is a low profile stage measuring just 80 mm (3.150 in.) high with a compact footprint (including the motors) of 348 mm x 348 mm (13.701 in. x 13.701 in.). Read more »

Motion Control – Pegasus Linear Bearings – For the Time A Linear Bearing Simply Cannot Fail!

Posted by Editor on June 17th, 2022

Motion Control  – Hybrid Ceramic Ball Linear Bearings

For those times when a Linear Bearing “CANNOT” Fail!

motion control - linear bearings

motion control - linear motion products

 

 

E. Longmeadow, MA — Motion Control – LM76 has developed the most corrosion resistant linear bearing available. In space, deep under the sea, or in the harshest environments, when there can be no “Plan B,” Pegasus Series 1 Linear Ball Bearings can be counted on to perform. In some applications linear bearings will not move for days, weeks, months or even years, however, when called on to perform they must work as if they just came out of the box. LM76’s Pegasus Series 1 Linear Bearings feature Silicon Nitride (SiNi) Ceramic Balls in a shell with retainer and end caps all made from 440 Stainless Steel and then ArmorloyTM coated. Read more »

Newer Entries »

  • Categories

Powered by WordPress | Designed by: backlink indexing | Thanks to Mens Wallets, warcraft gold and buy backlinks