H2W Technologies: Linear Motors - Motion Control Systems

Home

Motion Control – NEW! Elevator Stages from OES Feature 0.03 micron Resolution!

Posted by Editor on November 17th, 2023

Motion Control – 0.03 micron Resolution Elevator Stage!

motion control - elevator stage

Van Nuys, CA – — Motion Control – Two new motorized elevator stages, the DAG20-120-01 and the DAG20-120-04 have been released by Optimal Engineering Systems, Inc. (OES). These high resolution, compact, low profile elevator stages feature high stability 120 mm x 120 mm tables and 20 mm of vertical travel. High precision ball bearing profile rails assure very high parallelism and smooth motion throughout the raising and lowering of the table. These Z-Axis Stages are ideal for: Microscopy, inspection, metrology, positioning, photonics, sampling, and laser drilling and machining. Read more »

Motion Control – Application- A Wasp Shows the Way!

Posted by Editor on November 10th, 2023

Motion Control – Flexible Operating Tool

What do wasps have to do with brain surgery? At first glance, not a whole lot. However, one species serves as the model for an innovative brain surgery needle that is being developed by a team of researchers from England.

Fall River, MA — Motion Control Components Application – In tumor treatment, neurosurgeons today use a thin, rigid needle to inject medication into the affected brain tissue. This carries a relatively high risk of injuring healthy tissue, because a rigid needle only allows the surgeon to enter a certain region of the brain, following a straight path. The ideal solution would be a flexible operating tool. Read more »

Motion Control – Maxon’s Driven Magazine – See the article “Speed or Torque – or Both?”

Posted by Editor on October 17th, 2023

Motion Control – Maxon’s Driven Magazine

Motion Control article “Speed or Torque – or Both” in Maxon’s Driven magazine helps in selecting the right motor for an application. An application that could be on Mars, under water, or even implanted in the human body!

Fall River, MA — Motion Control – The Maxon catalog contains a large number of brushless motor types that are called EC Motors. The artice in this issue of DRIVEN briefly describes their properties and possible areas of application. Read more »

Linear Motion Spindle Drives – Maxon GP 6 S Miniature Spindle Drives for Linear Positioning Tasks!

Posted by Editor on September 21st, 2023

Linear Motion Spindle Drives

The GP 6 S micro linear motion spindle drives have a diameter of six millimeters and is available with integrated ball bearings for high axial loads. Versions include metric ceramic or metal spindles.

Fall River, MA – Linear Motion Spindle Drives are the perfect solution for linear positioning systems, lens adjustment, or syringe pumps. If the drive also has to be compact, then maxon motor’s GP 6 S spindle gear is the perfect choice. To provide a cost-effective alternative to the ceramic version, it is now also available with a metal spindle. Read more »

Motion Control – Low Inertia, High Precision, Hollow Core Voice Coil Motor from Moticont!

Posted by Editor on September 7th, 2023

Motion Control – Hollow Core Voice Coil Motor

Van Nuys, CA – Motion Control – A low inertia hollow core voice coil or moving coil linear motor from Moticont, the HVCM-051-025-019-01, features high acceleration, precise positioning to less than one micron (0.00004 in.), high reliability, and low cost. This cleanroom friendly, non-commutated motor is available off-the-shelf. The HVCM-051-025-019-01 hollow core voice coil linear motor has an open apertures of 0.750 in. (19.05 mm).

The hollow core allows for optics, illumination, laser beams, or cables to pass through. With a 0.50 in. (12.7 mm) stroke length, a continuous force rating of 4.8 lbs (21.3 N) and a peak force of 15.15 lbs (67.4 N) at a 10% duty cycle, this compact voice coil motor measuring just 2.000 in. (50.8 mm) dia. X 1.00 in. (25.4 mm) housing length, is ideal for applications such as: Positioning, medical diagnostics and testing, laser beam steering, dynamic vibration absorption, optical focusing, laser cutting & welding, scanning, assembly, and wafer handling. Read more »

Motion Control – Build-to-Order High Precision XZG Positioning Stages (X-axis, Z-axis, and Goniometer) from OES!

Posted by Editor on August 31st, 2023

Motion Control – X-axis, Z-axis, plus Goniometer from OES!

Van Nuys, CA – — Motion Control – An extensive series of XZG Positioning Stages (X-axis, Z-axis, and Goniometer) is the newest addition to the OES (Optimal Engineering Systems, Inc.) family of high precision motion control stages. Built to order, a user can select from any combination of linear stages with travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for both the X and Z axes that feature high precision 1 mm per turn lead screws, and if required travel lengths over 100 mm are also available. Additionally, any of three goniometers with +/-10, +/-15, +/-45 degrees of travel can be selected and mounted in a horizontal (pictured) or vertical orientation.

Additionally, four motor options are the: -01 version which has Stepper Motor driven axes, -02 version has Three Phase-Servo Motor driven Axes, -03 version has DC Servo Motor Driven Axes and -04 version has Stepper Motor Driven Axes with Quadrature Optical Encoders for position verification. Read more »

Motion Control – XZ-Axis Motorized Linear Positioning Stages feature 1 Micron Repeatability from Optimal Engineering Systems, Inc. (OES)!

Posted by Editor on August 11th, 2023

Motion Control – XZ-Axis Positioning Stages

Van Nuys, CA – — Motion Control – OES (Optimal Engineering Systems) has added a new series of 15 mm, 30 mm, 50 mm, and 75 mm Linear Motion Positioning Stages to their broad selection of precision motion control components. Each of these motorized XZ-Axis Linear Positioning Stages features 1 micron repeatability and 10 micron positional accuracy. Both the X-axis (horizontal axis) and the Z-axis (vertical axis) have the travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm and even longer to meet your application requirements. Read more »

Motion Control – Open Aperture Voice Coil Stage Features 1 Micron Positioning Resolution!

Posted by Editor on July 24th, 2023

Motion Control – Open Aperture Voice Coil Stage

Van Nuys, CA – Motion Control Components – The compact HCDS-025-038-02-B1-01 Voice Coil Stage from Moticont has a foot print of just 2.000 in. (54.0 mm) wide by 5.000 in (127.0 mm) long and features a positioning resolution of 1 micron and a 0.125 in. (3.175 mm) open aperture. This precision cross roller stage has a 0.97 in. (24.6 mm) range of motion with 1.0 lb. (4.4 N) of continuous force and 3.2 lb (14.2 N) peak force. The zero cogging, clean, quiet, efficient, low inertia, high acceleration, high speed voice coil driven stage has a built-in home switch for accurate initialization. Read more »

Motion Control – Features of 600 MM Vertical Lift Stage Include: Stability, High Loading, Low Cost, and 5 Micron Repeatability!

Posted by Editor on July 13th, 2023

Motion Control – 600 MM Vertical Lift Stages

Van Nuys, CA – Motion Control – The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm. The AT20-600-01 (pictured) is driven by a Two-Phase Stepper Motor features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 is driven by a Brushless DC Servo Motor with a Quadrature Incremental Encoder and the AT20-600-03 is driven by a DC Servo Motor with a Quadrature Incremental Encoder. Each of the Servo Motor options, the -02 and -03 versions, offer higher travel speeds, increased positional accuracy, and repeatability. The AT20-600-04 is driven by a Two-Phase Stepper Motor with a Quadrature Incremental Encoder mounted on the motor for position verification. Read more »

Motion Control – Open Aperture Voice Coil Stages Feature 1.20 Inches of Travel and Resolutions of 29.95 and 25.4 Microns!

Posted by Editor on July 10th, 2023

Motion Control – Open Aperture Voice Coil Stages!

Van Nuys, CA – Motion Control – The Moticont’s HCDS-051-064 Series of Open Aperture Voice Coil Stages are linear DC motor (also called voice coil) driven stages. Designed for closed loop servo operation, an integral quadrature optical encoder with differential outputs is standard. The stages are: Clean, quiet, and efficient, with low inertia, high acceleration, and high speed. Each stage has a built-in home switch for accurate initialization upon power up. Read more »

Linear Motion Precision Stages – Choose the Right Low Cost Stage to Suit Your Motion Control Application!

Posted by Editor on July 3rd, 2023

Linear Motion Precision Stages

Van Nuys, CA – — Linear Motion Precision Stages – OES (Optimal Engineering Systems) offers ten high precision, low cost linear positioning stages that can be easily integrated into new and existing applications. Choosing the best slide for the application is easy. The five AQ120 and five AQ130 series of linear motorized stages are available in travel distances of: 50 mm (1.969 in.), 100 mm (3.937 in.), 150 mm (5.906 in.), 200 mm (7.874 in.), and 300 mm (11.811 in.). Read more »

Motion Control – Metric and Inch Dimensioned Electric Cylinders Feature High Speed, Zero Cogging, and 1.25 Micron Resolution!

Posted by Editor on July 1st, 2023

Motion Control – Metric & Inch Dimensioned Electric Cylinders!

Van Nuys, CA – Motion Control Components – New, Metric and Imperial dimensioned Electric Cylinders or Linear Voice Coil Servo Actuators have been released by Moticont. The new, compact 25.4 mm (1.000 in.) stroke SDLM-025-095-01-01M and SDLM-025-095-01-01 Linear DC Servo Actuators feature high repeatability, high acceleration/deceleration, and zero cogging! These high force-to-size Electric Cylinders have linear encoders mounted internally for closed loop servo operation. Additionally, to operate at peak efficiency, integral temperature sensors provide data to achieve the highest possible throughputs.

The clean fully enclosed SDLM-025-095-01-01M and SDLM-025-095-01-01 Servo Actuators are 25.4 mm (1.000 in.) in diameter, the housing is 95.3 mm (3.750 in.) long and the total length of the housings and shafts are 139.7 mm (5.500 in.). Read more »

Motion Control – Low Cost Linear Optical Encoder Module and Linear Scale Feature 1.25 Micron Resolution!

Posted by Editor on June 22nd, 2023

Motion Control – Linear Optical Encoder Modules!

Van Nuys, CA – Motion Control Components – Moticont has released their OEM-00125U-01 Linear Optical Encoder Module and LS-00125U-01 Linear Scale. The compact linear encoder module measures just 51.5 mm (2.027 in.) long by 5.99 mm (0.236 in.) wide by 0.8 mm (0.073 in.) high. This high, 1.25 micron resolution, low power encoder module features TTL Quadrature Outputs and requires only a single +3.3 or +5 VDC supply.

The LS-00125U-01 Linear Scale supplied is only 6 mm (0.24 in.) wide by 0.3 (0.01 in.) high and would be attached to a flat surface using PSA adhesive. The standard scale length is 76.2 mm (3.00 in.) long. The linear scale is available with lengths up to 610.0 mm (24.00 in.). The quadrature signals are output differentially. The module also features a TTL level HOME output. Read more »

Motion Control – XY Alignment Stage Featuring High Resolution and High Repeatability Available from OES!

Posted by Editor on June 15th, 2023

Motion Control – XY Alignment Stage

Van Nuys, CA – — Motion Control – The AU200-50×50-SC Alignment Stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, high repeatability XY stage for such applications as: alignment, assembly, laser drilling, machining, medical, industrial, semiconductor handling, testing, scanning, and optical applications. The linear travel of the X and Y axes is 50 mm x 50mm, and the resolution of each axis is 5 microns (non-micro-step) or 0.125 microns (with 20 micro-steps per step motor driver in use), repeatability is 1.5 microns, and positional accuracy is 5 microns. The 1 mm per-turn lead screws and preloaded V-groove and crossed roller bearings contribute to the high precision and stiffness of the AU200-50×50-SC Alignment Stage. Read more »

Motion Control – Smaller in Diameter than a US Quarter, This Miniature Voice Coil Motor Has a High Force-to-Size Ratio!

Posted by Editor on June 8th, 2023

Motion Control – Miniature Voice Coil Motor

Van Nuys, CA – Motion Control Components – Smaller in diameter than a United States quarter, the miniature Linear Voice Coil Motor, LVCM-019-016-02, from Moticont has a high force-to-size ratio! It produces 8.9 oz. (2.5 N) of continuous force and 28.0 oz. (7.8 N) of peak force in a compact 0.750 in. (19.1 mm) diameter x 0.94 in. (23.8 mm) long envelope (at mid stroke). Read more »

Motion Control – 20 mm Linear Stepper Motor by Nippon Pulse are available from Electromate!

Posted by Editor on May 30th, 2023

Motion Control – 20 mm Linear Stepper Motor!

Vaughan, Ontario, Canada — Motion Control — Nippon Pulse is excited to introduce its smallest linear stepper motor yet, the PFL20 Linearstep. The PFL20 is a highly efficient, high thrust tin-can linear actuator with a 20mm diameter and a bipolar winding.

The motion control PFL20 is RoHS-compliant, has a 30/60mm effective stroke, and can reach 6 N of force at 200 pps. With 24 steps per revolution, the lead screw has a 1.2mm thread pitch; the PFL20 also reaches 5V rated voltage, resistance of 33 Ohms/phase and inductance of 12mH/phase. The datasheet with additional specifications can be found here. Read more »

Motion Control – 0.625 in. Diameter Miniature Voice Coil Motor Has A 0.125 in. Open Aperture!

Posted by Editor on May 22nd, 2023

Motion Control – Miniature Voice Coil Motor!

Van Nuys, CA – Motion Control Components – Moticont is introducing their most compact miniature hollow core linear actuator; the HVCM-016-010-003-01 Linear Voice Coil Motor, featuring a 0.125 in. (3.2 mm) open aperture and high force-to-size ratio. This miniature open aperture actuator is a true DC Linear Servo Motor. Quiet and clean, this non-commutated, miniature brushless servo motor features: Zero cogging and zero backlash when connected directly to a load, high acceleration/deceleration, and high speed. Measuring just 0.625 in. (15.9mm) by 0.625 in. (15.9mm) long at mid-stroke it has a continuous force rating of 5.0 oz. (1.4 N) and a peak force of 15.7 oz (4.4 N) at a 10% duty cycle.

The open aperture of the HVCM-016-010-003-01 Linear Motor allows for optics, illumination, and laser beams. It is ideal for applications such as: Haptic feedback, medical diagnostic equipment, testing, optical focusing, positioning, laser beam steering, wafer handling, dynamic vibration absorption, laser drilling, cutting, welding, and machining applications. Read more »

Motion Control – X, XY & XYZ Voice Coil Stages from MotiCont!

Posted by Editor on May 8th, 2023

Motion Control – Voice Coil Stages

Van Nuys, CA – Motion Control – The high performance compact positioning voice coil driven linear stages are used in positioning applications where high speed, high acceleration or high accuracy is required.

The motion control motorized linear stages are fully self-contained. Each stage utilizes one or two voice coil motor(s), a linear carriage system, an optical quadrature encoder feedback device and a home switch. The standard positioning resolutions of 1 micron through 29.95 microns are available for immediate delivery. Other resolutions are available upon request. Read more »

Motion Control – High Precision Four-Axes Positioning Stages with Four Motor Options

Posted by Editor on April 28th, 2023

Motion Control – Four Axes Positioning Stages

Van Nuys, CA – Motion Control – OES (Optimal Engineering Systems, Inc.) has added to their extensive line of purpose-built stages. The new XYZR Series of Four-axes Stages are the integration of a: 15 mm, 30 mm, 50 mm, 75 mm, or 100 mm linear stages (in any combination) for the X, Y, and Z axes, and a 60 mm or 100 mm diameter rotary stage capable of 360 degrees of continuous rotation. These stages are the ideal choices for: Laser scanning, drilling, and machining, reverse engineering, inspection, assembly, measurements, tracking, and positioning. Read more »

Linear Motion Spindle Drive – Integrated Motor with Absolute Multi-Turn Encoder from JVL is available from Electromate!

Posted by Editor on April 25th, 2023

Linear Motion Spindle Drive

Vaughan, Ontario, Canada — Linear Motion Spindle Drive — JVL A/S, one of the world’s leading producers in the field of integrated servo and stepper motors, is announcing a new addition to its ServoStep™ motors, a directly mountable motor for driving spindles. It’s perfect for replacing hand wheels in format change applications.

All-in-one unit

ServoStep™ has everything built-in including motor, encoder, drive electronics, control electronics with ePLC™ and optional Ethernet or CAN bus integrated into one compact Linear Motion Spindle Drive. Read more »